step

Step response plot of dynamic system.

Syntax

• [y, t, x] = step(sys)

• [y, t, x] = step(sys, t)

• [y, t, x] = step(sys, tFinal)

• [y, t, x] = step(sys, [t0, tFinal])

Input argument

• sys - a lti model.

• t - Time vector.

• tFinal - End time for step response: scalar.

• [t0, tFinal] - Time range for step response: two-element vector.

Output argument

• y - Simulated response data: matrix or vector.

• t - Time vector: vector.

• x - State trajectories: matrix or vector.

Description

The function defaults to applying a step at t0 = 0 with initial conditions U = 0, dU = 1, and td = 0.

The step function, used as [y, tOut] = step(sys), calculates the step response (y) of the dynamic system sys.

The time vector tOut is in the time units of sys, and the function automatically determines the time steps and simulation duration based on the system dynamics.

If you use [y, tOut] = step(sys, tFinal), the step response is computed from t = 0 to the specified end time t = tFinal.

Similarly, [y, tOut] = step(sys, [t0, tFinal]) computes the step response from t0 to tFinal.

Example

A = [-10 -20 -30;1  0  0; 0  1  0];
B = [1;   0;   0];
C = [0   0   1];
D = 0;
T = [0:0.1:1];
U = zeros(size(T, 1), size(T, 2));
X0 = [0.1 0.1 0.1];
sys = ss(A, B, C, D);
step(sys);

See also

gensig, lsim.

History

Version	Description
1.0.0	initial version

Author

Allan CORNET